South Pacific Spas

The most practical innovation in Spas. Modest in design,
light in weight but heavy in style and convenience.
Manufactured and shipped as plug and play
(115 volts, 15 amps) but easily converted to 220 volts ,
for fast heat up from the 4,000 watt heater.

Complete with the only Factory equipped easy open
insulated hard covers. Covers have small lifter arms making
the cover removal and replacement just a simple open and
close move, anyone can do.

The Spa has 8 removable side panels so that all internal
components are easily accessible, all jets and tubing are
exposed for inspection or service. Electrical components
are isolated in an easily accessed compartment for access
to the pump and Spa Pak for 220 volt conversion or install
an Ozone device; which the Spa is ready to accept using
little effort.

The Spa is made using a unique single unitized body
molding process, sides, bottom and floor are all molded
in 1 single strong casting with fused in floor supports.
Other added supports throughout the Spa interior assure
years of service. Install on a level flat surface.

SEATING 4 Adults
DIMENSIONS 60” Long x 70” Wide x 30” Tall
WATER CAPACITY 250 Gallons
DRY WEIGHT 350 Lbs.
TOP CONTROLS Balboa Control System with Topside
Digital LED
ELECTRICAL Uses Standard 110v 15amp Dedicated
Service “Just Plug and Play” or 240v convertible
JETS 10 Jets Plus 2 Foot Massagers
PUMP 1.0 hp, 2 Speed, Aqua-Flo
HEATER 1kw/4kw Balboa
FILTER 25sq. ft.
INSULATION Fully Insulated
COVER Integrated, Fully Insulated, Hard Covers with
Built-in Lifters
OZONE Equipped with Tubing and Electrical for
rapid Installation
COLORS Sand or Granite